Trisun Ltd

  A mechanical seal can fail faster than you expect when heat builds up near the sealing faces. If cooling is poor, the fluid doesn’t circulate properly, or the support system isn’t right for the application, you could end up with leaks, more repairs and unexpected downtime. A thermosiphon system can help by moving buffer or barrier fluid through convection. The correct choice relies on your seal setup, how you use it and the cooling you need. Here are six key things to check before you choose. 1. Start with the seal arrangement First, confirm what kind of mechanical seal your equipment uses. Confirm if it is a mechanical seal and identify the needed support plan. Trisuns TS Thermosiphon System works well for API Plan 52 and API Plan 53A applications. Plan 52 uses a buffer fluid. Plan 53A uses a barrier fluid. The choice depends on process conditions and acceptable leakage. The seal design is already installed. Don't select a system without being sure of your equipment’s required...

  Pressure keeps changing. Airflow becomes unstable. The compressor starts using more energy than it should. These issues can hurt production. They also raise maintenance costs. Sometimes the control valve needs attention. Choosing the right Compressor control valve begins with knowing your equipment, operating conditions and control needs. 1. Start with your compressor type Different compressors need control methods. Reciprocating compressors may use unloading or capacity-control setups. Screw and centrifugal compressors often need different approaches. Before choosing a valve, identify your compressor model. Know what the valve must control. Is the goal to manage airflow? Adjust capacity?. Keep pressure stable? A clear answer helps narrow your choices. Trisun supplies industrial compressor control valves for applications. Make sure the product fits your system before ordering. 2. Check pressure, flow and operating temperature The valve must work under the conditions it will fac...